Dual-Temperature Integrated Mold Temperature Controller

The 300°C high-temperature precision mold temperature controller is a device specifically used for mold temperature control. It can provide precise temperature control up to 300°C, meeting the needs of various high-temperature mold processing technologies. This mold temperature controller adopts advanced heating and cooling technologies to ensure the stability and uniformity of mold temperature, thereby improving product quality and production efficiency.

The counterflow cooling tower is a common type of cooling tower. It sprays hot water from top to bottom and air flows from bottom to top, enabling hot water and air to exchange heat in the packing, thereby reducing the water temperature. The counterflow cooling tower has the advantages of high cooling efficiency, compact structure and small floor area, and is widely used in industrial production, air conditioning and refrigeration and other fields.    

The air-cooled water chiller uses air as the cooling medium and dissipates the heat in the condenser to the surrounding air through fans. The refrigerant circulates in the unit and realizes the cooling of water through processes such as compression, condensation, throttling, and evaporation. The cooled water can be used in various industrial production processes, air conditioning systems of commercial buildings, or other occasions that require cooling.

The mold temperature machine is mainly composed of a heating system, a cooling system, a circulating pump, and an intelligent control system. During operation, the circulating pump drives the heat transfer medium (water or heat transfer oil) to circulate between the equipment and the mold. When the mold temperature is lower than the set value, the heating system starts quickly, and the high-efficiency heating elements heat up rapidly; when the temperature is too high, the cooling system intervenes, and the excess heat is timely removed through a plate heat exchanger or direct cooling method, thereby achieving precise control of the mold temperature.

Screw water-cooled chiller is a highly efficient refrigeration equipment. It adopts screw compressor and has the characteristics of stable operation, low noise and high energy efficiency ratio. Through water cooling, it can quickly and effectively reduce the water temperature and provide stable low-temperature cooling water for various industrial productions and commercial places.

Compared with water-cooled water chillers, air-cooled water chillers do not consume a large amount of water resources and are more environmentally friendly. At the same time, its high-efficiency compressor and optimized system design can reduce energy consumption and improve energy utilization efficiency.

A plastic crusher machine is a device used to crush plastic into small pieces for easy disposal. The machine works by breaking down the plastic material into small pieces using a rotating blade. The crushed plastic can then be melted down and reused to make new products, thus reducing the amount of plastic waste in the environment. It is an essential machine in the plastic recycling process.

When the mold temperature is lower than the set value, the heating system of the mold temperature controller starts and heats the heat medium to the required temperature. When the mold temperature is higher than the set value, the cooling system of the mold temperature controller starts and cools the heat medium to the required temperature.