6KW Water-Heating Mold Thermostat Temperature Controller for Plastic Injection Molding Molds
6KW Water Heating Mold Temperature Controller Machine / Mold Heater For Plastic Injection Machine Technical Parameters
Heating Capacity: 5160 kcal/h, 6kW
Electrical System:
System Power: 380V AC 3P/PE 50Hz (Customization supported)
Input Power: 6.37kW
Heat Transfer Medium Type: Water
Pump ：Lift:32m ,Flow Rate: 45L/min ,Power: 0.37kW ,Operating Pressure: ≤10bar , Operating Temperature: +5 ~ +40℃
Heat Exchanger:
Maximum Temperature: 120℃ (Customization supported 160℃~220℃)
Minimum Temperature: Cooling water temperature ± 20℃
Temperature Deviation: PID±0.1℃
Cooling Method: Indirect cooling
Electrical Protection: Electrical protection, overcurrent protection, phase sequence/phase loss protection
Equipment Protection: Anti - dry burning protection, overload protection, over temperature protection, pressure protection
Equipment Description：Weight: 53kg Dimensions ,(L×W×H): 670*310*700mm
-----------------------------
Brand Pump
Equipped with a high - temperature resistant, high - pressure resistant, and low - noise pump. It ensures stable operation and an extended service life, delivering reliable performance you can count on.
PID Display Controller
The PID display controller uses high-precision PID to regulate key parameters (temperature, pressure), shows real-time data, ensures stable equipment operation, and suits industrial scenarios.
Schneider Contactor
Comes with an isolated electrical control box, providing superior heat insulation. It effectively extends the service life of electrical components, ensuring efficient and lasting operation.
Pure Copper Interface
Both inlets and outlets adopt all - copper interfaces, offering excellent high - temperature resistance. (The 6KW model has two inlets and two outlets; the 9KW and 12KW models feature four inlets and four outlets)
Water Pressure Controller
Precisely regulates water pressure, stabilizes system operation, and safeguards equipment safety and efficiency.
-----------------------------
Product Introduction (Mold Temperature Controller)
This mold temperature controller is not only a core device for controlling mold temperature in industrial production, but also a key assistant in ensuring stable production processes and improving product quality. By precisely regulating mold temperature, it can not only ensure product forming accuracy, but also shorten the production cycle.
In terms of core configurations, it is equipped with a brand-name water pump that is not only high-temperature resistant and high-pressure resistant, but also operates with low noise and strong stability, thus efficiently driving the circulation of heat-conducting media. The heating pipeline is made of stainless steel through one-piece thickened forming, which not only has tight connections without leakage, but also has outstanding durability, so it can ensure efficient and stable heat transfer. It is equipped with a Schneider contactor and an isolated electrical control box, which not only has excellent heat insulation effect, but also can effectively delay the aging of electrical components, thereby prolonging the service life of the equipment. The pure copper inlet and outlet interfaces have good high-temperature resistance, and the built-in water pressure controller can precisely regulate water pressure, which not only further improves the temperature control accuracy, but also enhances the operational safety.
In addition, there is also a CE-certified model accredited by SGS, which not only complies with EU safety standards, but also can smoothly enter the European market for circulation, providing strong support for international business expansion.
Application Range
Product Advantages
-----------------------------
Production Process
Step 1: Component Pre - assembly
In the picture, blue racks, pumps and other components are neatly arranged, and workers are conducting pre - assembly operations. First, the initial assembly of racks and basic components is completed, preparing for the subsequent integration of core components, and ensuring the accurate alignment of each part to lay a solid foundation for the equipment structure.
Step 2: Complete Machine Integration
Multiple mold temperature controller main bodies are taking shape and entering the complete machine integration stage. Core components such as heating pipes, contactors, and pure copper interfaces are accurately combined with pre - assembled racks, realizing the integrated assembly of stainless steel pipelines, electrical control systems, etc., and completing the construction of the main body of the equipment.
Step 3: Factory Debugging
The finished mold temperature controllers enter the final debugging stage. A full inspection is carried out on the water pressure controller, solenoid valve, and temperature control system. The operation stability and temperature control accuracy are tested by simulating industrial scenarios, and potential problems such as leakage and noise are investigated, ensuring that the equipment reaches the best state before leaving the factory.
-----------------------------
-----------------------------
Why Choose Our Mold Temperature Controllers?
1. Strict Production Flow
Component Prep: Precise pre - assembly of key parts (racks, pumps) ensures accurate alignment from the start.
Full Integration: Seamless merging of heating pipes, control systems, etc., builds robust, high - performance units.
Thorough Testing: Rigorous factory checks (simulate real - world use) fix leaks, noise, and ensure stable, accurate temp control.
2. Quality - Built Design
Top - Tier Parts: High - temp brand pumps, stainless - steel pipes, Schneider contactors ensure long - term reliability.
Safe & Efficient: Isolated control boxes (heat insulation) and pure - copper interfaces (durable heat transfer) boost safety and production speed.
3. Flexible & Compliant
Power Choices: 6KW–12KW models fit small - batch to large - scale mold temp needs.
Global Ready: CE/SGS - certified units meet EU standards for easy global market entry.
4. All - Round Support
Tech Help: Expert guidance for installation, troubleshooting—get seamless integration.
After - Sales Care: Fast response to issues/minimize downtime—keep production running.
Choose us for reliable, adaptable mold temp controllers. We blend strict production, quality parts, and support to boost your efficiency and growth.
Quick Specs: ZL-MT6O oil mold temperature controller with 6kW heating, 350C max temperature, CE certified. Best for plastic injection molding molds and small-batch high-temperature production. A mold temperature controller is a specialized device used to regulate the temperature of molds, widely utilized in plastic molding, rubber molding, die casting, extrusion, and other industrial productions requiring precise temperature control. By heating and cooling the circulating medium, the mold temperature controller can quickly and accurately adjust and maintain the temperature of the mold, thereby enhancing product quality and production efficiency.
Quick Specs: ZILLION dual-temperature integrated mold temperature controller with water+oil combination, CE certified. Best for multi-zone molding and complex plastic injection molding. The dual-temperature integrated mold temperature controller is an advanced temperature control device specially designed for heating and cooling molds. It can simultaneously provide two different temperature control modes to meet the precise requirements of mold temperature in different process stages.
Quick Specs: ZL-PC1400B industrial plastic crusher with 55kW motor, 2500kg/h output, SKD-11 blades, CE certified. Best for high-volume plastic recycling lines, large-scale PET bottle processing, and industrial scrap operations. ZL-PC1400B Wide Plastic Crusher — 55kW motor, 2500kg/h capacity, wide opening, CE certified. Industrial plastic recycling machine. SKD-11 blades, low noise, 1-year warranty. Buy now at factory price! ZILLION ZL-PC1400B Heavy Duty Plastic Crusher - 55kW Super Industrial Crusher for Major Commercial Plastic Recycling Operations For major commercial recyclers and large-scale industrial plastic waste processing facilities demanding maximum throughput: The ZL-PC1400B delivers 2000-2500kg/h with a 55kW motor, 42-piece SKD-11 rotary blade system, and an extra-wide 1420x800mm feed opening — the ultimate industrial-scale workhorse for maximum-throughput operations with extra-large format plastic waste materials. Technical Specs: Motor: 55kW / 380V / 50Hz (400V/380V/110V/220V/415V/440V available) Capacity: 2000-2500kg/h (tested with PET bottle flakes, <5% moisture, 20mm screen) Rotary Blades: 42pcs SKD-11 | Fixed Blades: 8pcs SKD-11 Feed Opening: 1420 x 800mm Screen: 20mm (customizable 12-25mm) Net Weight: 5200kg | Gross Weight: 5600kg Machine Size: 2400 x 2300 x 3000mm | Crated Size: 2600x2500x3200mm FOB Price: USD $19000 / Set | MOQ: 1 Set | 15-25 days lead time
Overview The ZL-25T is a 25-ton (88 kW) industrial FRP counter flow cooling tower purpose-built for hvac epc contractor applications. ZILLION engineered this 25-ton counter flow cooling tower with CE ISO 9001:2015 certification and quality construction for long service life in demanding industrial environments. Key Specifications Cooling capacity: 88 kW (25 refrigeration ton) Water flow rate: 19.51 m3/h design flow Heat rejection: 5 deg C approach to wet-bulb at 27 deg C design Fan airflow: 200 CMM at 770 mm fan diameter Motor power: 0.75 kW at 380V 3-phase 50 Hz Head loss: 16 kPa at design flow Dry weight: 98 kg, operating weight: 500 kg Overall dimensions: H1900 x Dia1380 mm Design Features FRP counter-flow shell for corrosion resistance and 20-year service life Aluminum alloy fan blade for industrial duty IP55 Class F insulation for harsh industrial environments Counter flow design for maximum heat transfer efficiency and 3 deg C approach Low-drift eliminator reduces water loss to 0.01 percent of circulation Applications IP55 Class F insulation, CE ISO 9001:2015 certified for medium-to-large HVAC chiller condenser water loop integration. 1900 x 1380 mm footprint fits standard equipment room layouts. Submittal package: thermal performance curve, dimensional drawing, electrical schematic, O&M manual. Project delivery 20-30 days for bulk orders. Compatible with BACnet and Modbus BMS integration. Bid-ready specifications for tender documents. Contact ZILLION Today Get a quote for the ZL-25T cooling tower from ZILLION factory direct. Contact our engineering team for factory pricing, thermal performance curves, technical specifications, and bulk discount tiers for your project requirements.
Materials recovery facilities and post-consumer recycling lines face a different challenge than in-plant scrap: variable input quality, contamination, and mixed-resin streams. The ZL-PC600 Recycling Plastic Shredder is built for exactly that environment, with 18 SKD-11 blades that tolerate contamination and a screening system that lets operators tune output for downstream separation.
Overview The ZL-225T is a 225-ton (791.3 kW) industrial FRP counter flow cooling tower purpose-built for hvac epc contractor applications. ZILLION engineered this 225-ton counter flow cooling tower with CE ISO 9001:2015 certification and quality construction for long service life in demanding industrial environments. Key Specifications Cooling capacity: 791.3 kW (225 refrigeration ton) Water flow rate: 175.5 m3/h design flow Heat rejection: 5 deg C approach to wet-bulb at 27 deg C design Fan airflow: 1500 CMM at 2100 mm fan diameter Motor power: 5.5 kW at 380V 3-phase 50 Hz Head loss: 33 kPa at design flow Dry weight: 1050 kg, operating weight: 2770 kg Overall dimensions: H3640 x Dia4120 mm Design Features FRP counter-flow shell for corrosion resistance and 20-year service life Aluminum alloy fan blade for industrial duty IP55 Class F insulation for harsh industrial environments Counter flow design for maximum heat transfer efficiency and 3 deg C approach Low-drift eliminator reduces water loss to 0.01 percent of circulation Applications IP55 Class F insulation, CE ISO 9001:2015 certified for HVAC district heavy industrial HVAC chiller condenser water loop integration. 3640 x 4120 mm footprint fits standard equipment room layouts. Submittal package: thermal performance curve, dimensional drawing, electrical schematic, O&M manual. Project delivery 30-45 days for bulk orders. Compatible with BACnet and Modbus BMS integration. Bid-ready specifications for tender documents. Seismic certification package available. Contact ZILLION Today Get a quote for the ZL-225T cooling tower from ZILLION factory direct. Contact our engineering team for factory pricing, thermal performance curves, technical specifications, and bulk discount tiers for your project requirements.
A plastic crusher machine is a device used to crush plastic into small pieces for easy disposal. The machine works by breaking down the plastic material into small pieces using a rotating blade. The crushed plastic can then be melted down and reused to make new products, thus reducing the amount of plastic waste in the environment. It is an essential machine in the plastic recycling process.
Quick Specs: ZL-MT12O oil mold temperature controller with 12kW heating, 350C max temperature, CE certified. Best for plastic injection molding high-temperature molds and die casting. Oil-type mold temperature controller: Uses heat transfer oil as the heat medium, which has high temperature control accuracy and stability and is suitable for high-temperature working environments. But the heat transfer oil needs to be replaced regularly and the cost is relatively high.
Our company's series of products are well-known in the plastic auxiliary machinery industry for their excellent performance and high cost performance.
IPv6 network supported
English 
English
español
العربية
