Plastic Hopper Dryer Machine Paremeter
| Model | ZL-100KG | ZL-150KG | ZL-200KG |
| Heating Power | 6KW | 9KW | 12KW |
| Fan Power | 215W | 215W | 320W |
| Volume | 100KG | 150KG | 105KG |
| Size | 1020*780*1150MM | 1100*760*1050MM | 1280*800*1350MM |
| Net Weight | 66KG | 78KG | 105KG |
| Note | The above dimensions and weight do not include the triangular bracket. If you need to use the machine independently, it is recommended to add a bracket. | ||
Machine parameters are subject to change without notice. If you want to know more, please contact us.
Machine Introduction
Working Principle:
The working principle of a plastic dryer is mainly through the hot air circulation method. The air blown by the drying fan becomes high-temperature dry air after being heated by the drying electric heater. Through the specific air duct design, the hot air is evenly dispersed in the insulation barrel to fully contact with the plastic particles. As the hot air circulates, the moisture in the plastic particles will gradually evaporate, thereby achieving the drying of the plastic particles.
Advantages：
Applications：
FAQ:
The plastic hopper dryer is a device used for drying plastic particles. It is usually used in conjunction with plastic processing equipment such as injection molding machines and extruders. By heating and circulating air, the plastic hopper dryer can remove moisture from plastic particles and improve the processing performance and product quality of plastics.
The air-cooled water chiller uses air as the cooling medium and dissipates the heat in the condenser to the surrounding air through fans. The refrigerant circulates in the unit and realizes the cooling of water through processes such as compression, condensation, throttling, and evaporation. The cooled water can be used in various industrial production processes, air conditioning systems of commercial buildings, or other occasions that require cooling.
It can crush various plastics and rubbers, such as plastic profiles, tubes, rods, filaments, films, waste rubber products, defective products and sprues generated by injection molding machines, etc. It is often used beside injection molding machines to immediately crush the sprues and waste materials generated during injection molding. A blower or suction machine can be installed to achieve immediate recycling and reuse of the crushed materials. It can also be used alone for low-output crushing requirements. It has a very low noise level.
Plastic crusher is a machine for crushing plastic products. It uses advanced technology and a powerful power system to quickly break various plastics like bottles, tubes, and sheets into small particles. The equipment is multifunctional. Its well - designed crushing chamber fits plastics of different shapes and sizes. High - quality cutters are hard and wear - resistant, ensuring stable operation and reducing costs. It focuses on environmental protection, reducing noise and dust. It's easy to operate and adjustable as required, widely used in plastic recycling and industrial production, being a key device for plastic resource recycling.
A mold temperature controller is a specialized device used to regulate the temperature of molds, widely utilized in plastic molding, rubber molding, die casting, extrusion, and other industrial productions requiring precise temperature control. By heating and cooling the circulating medium, the mold temperature controller can quickly and accurately adjust and maintain the temperature of the mold, thereby enhancing product quality and production efficiency.
The water cooling tower is a device used for cooling circulating water. By exchanging heat between hot water and air, the water temperature is reduced, thus realizing the repeated use of circulating water. Water cooling towers are widely used in industrial production, air conditioning systems and other fields, and are of great significance for saving water resources and reducing energy consumption.
The small plastic crusher is a device specially used for crushing small plastic items. It is small in size and easy to be placed in various places, such as small factories, laboratories, and corners of workshops. The machine is mainly composed of a feeding port, a crushing chamber, cutting tools, a motor and a discharge port. Through the motor driving the cutting tools to rotate at high speed, the plastic put into the feeding port is quickly crushed into small particles. The small plastic crusher is suitable for processing various waste plastic products, such as beverage bottles, plastic films, small plastic parts, etc. It is simple to operate, safe and reliable, and can effectively realize the recycling of plastics, reducing resource waste and environmental pollution.
Large air-cooled chillers are advanced cooling equipment designed to meet the cooling needs of various industrial and commercial applications. These chillers are characterized by their efficient air-cooled condenser, which dissipates heat without the need for a water source. This makes them highly suitable for installations where water resources are limited or access to cooling water is difficult.
Our company's series of products are well-known in the plastic auxiliary machinery industry for their excellent performance and high cost performance.
IPv6 network supported
English 
English
español
العربية
