ZL-10T 10 Ton Industrial FRP Counter Flow Cooling Tower for CFO Procurement
| Parameter | Value |
|---|---|
| Model | ZL-10T |
| Cooling Capacity | 10 RT (35.2 kW heat rejection) |
| Water Flow Rate | 7.81 m3/h (130 L/min) |
| Cooling Range | 5C (37C inlet to 32C outlet at design WB 27C) |
| Approach to Wet-Bulb | 5C at design conditions |
| Fan Motor | 0.37 kW (0.5 HP) 380V 3-phase 50Hz |
| Fan Diameter | 635 mm axial |
| Air Flow Rate | 85 CMM (50,920 m3/h) |
| Head Loss at Design Flow | 13 kPa |
| Tower Dimensions (H x D) | 1820 x 940 mm |
| Dry Weight | 46 kg |
| Operating Weight (filled) | 190 kg |
| Noise Level | 60 dB(A) at 1 m |
| Tower Body Material | FRP (Fiberglass Reinforced Plastic) |
| Fan Blade Material | ABS plastic |
| Configuration | Counter Flow Square |
| Voltage | 380V 3-phase 50Hz (customizable 220V/415V) |
| Certifications | CE / ISO 9001:2015 |
| Warranty | 1 year (consumables excluded) |
The ZL-10T's procurement cost is straightforward — USD 850 EXW Dongguan for a single unit, with volume discounts of USD 765 (10+ units) and USD 680 (50+ units). But capex is only 20% of the 5-year total cost of ownership. The remaining 80% is operating expense:
Year 1 Opex breakdown (single ZL-10T):
Electricity (0.37 kW fan, 16 hr/day operation): 0.37 × 16 × 365 × USD 0.10/kWh = USD 216/year
Water (3% drift + blowdown at 7.81 m³/h circulation, 16 hr/day): 0.03 × 7.81 × 16 × 365 × 1000 = 1.37 million liters/year × USD 0.0015/liter = USD 2,055/year
Water treatment chemicals (algaecide + scale inhibitor): USD 220/year
Maintenance labor (12 hours/year at USD 25/hr): USD 300/year
Replacement parts (annual budget allocation): USD 180/year
Year 1 Opex total: USD 2,971/year
Adding capex amortized over 5 years (USD 850 / 5 = USD 170/year) plus Year 1 Opex gives a 5-year TCO of USD 850 + (USD 2,971 × 5) = USD 15,705 per tower.
The CFO-relevant comparison is rarely ZL-10T vs nothing — it is ZL-10T vs the air-cooled alternative. For a 10 ton process cooling load:
Air-cooled alternative (10 RT split system): Capex approximately USD 4,500; Opex approximately USD 3,800/year (higher electricity for compressor + condenser fan operation in hot climates).
ZL-10T + chiller pairing: Capex USD 850 (tower) + USD 6,500 (10 RT water-cooled chiller) = USD 7,350; Opex USD 2,971/year (tower) + USD 1,950/year (chiller) = USD 4,921/year.
On capex, the air-cooled option wins by USD 2,850 upfront. On opex, the water-cooled option wins by USD 1,121/year. The payback crossover occurs at month 31 (USD 2,850 / USD 1,121 per year × 12 months). For installations expected to operate >3 years, the water-cooled option is the lower total cost.
For an 18-month payback interpretation, factor in cooling capacity degradation: the air-cooled system loses 15-20% capacity at 35°C ambient, while the ZL-10T maintains rated capacity up to 38°C ambient. In hot-climate installations, the effective payback is closer to 12-15 months.
For procurement officers managing payment risk, the ZL-10T supports four payment instruments:
T/T (Telegraphic Transfer): 30% deposit upon order confirmation, 70% balance against B/L copy. Standard for established buyers; bank fees USD 30-80 per transaction depending on corridor.
L/C (Letter of Credit): Irrevocable L/C at sight for orders above USD 10,000. Adds 1-2% bank confirmation fee but provides strongest buyer protection.
Western Union: Available for sample orders and small purchases (under USD 5,000). Faster settlement than T/T but higher fees (1-3%).
Alibaba Trade Assurance: Order protection up to USD 50,000 per transaction with on-time shipment and quality guarantee. Adds 1.5% platform fee but covers dispute resolution.
For first-time buyers, Alibaba Trade Assurance is the lowest-risk option despite the 1.5% fee. For repeat buyers with established credit, T/T 30/70 remains the most cost-effective.
The ZL-10T's volume discount structure is:
1-9 units: USD 850 EXW Dongguan per unit
10-49 units: USD 765 EXW Dongguan per unit (-10%)
50-99 units: USD 680 EXW Dongguan per unit (-20%)
100+ units: USD 595 EXW Dongguan per unit (-30%)
For procurement officers planning fleet rollouts across multiple facilities, the 50-unit tier reduces total capex by USD 170 per unit. On a 50-unit order, savings total USD 8,500 versus 1-9 unit pricing.
Order volume discounts combine with the payment term benefit: a 50-unit order at Trade Assurance 1.5% fee adds USD 510, but the 20% volume discount saves USD 8,500 — a net 95% improvement on financing cost.
The ZL-10T's bill of materials is designed for 10+ year component life with periodic replacement:
Fan motor (0.37 kW): 50,000 hour bearing life at 16 hr/day operation = 8.5 years typical replacement interval. Replacement cost: USD 85.
Spray nozzles (PVC): 3-year replacement under normal water chemistry. Replacement cost: USD 12/set.
Drift eliminators (PVC): 5-year replacement under normal operation. Replacement cost: USD 45/set.
Fill media (PVC): 7-10 year replacement if water chemistry is properly managed. Replacement cost: USD 120.
Annualized spare parts budget for a single ZL-10T, averaged over 10 years: USD 180/year. For a 50-unit fleet, total annual spare parts budget: USD 9,000 — approximately 1.8% of fleet replacement value.
For procurement officers managing working capital cycles, the ZL-10T's lower capex (USD 850 vs USD 4,500 air-cooled) frees working capital for other investments. On a 50-unit cooling system expansion, the ZL-10T + chiller pairing saves approximately USD 75,000 in upfront capex versus an all-air-cooled system.
For a typical 10-ton process cooling application, the working capital release from ZL-10T selection is sufficient to fund 6-9 months of operating expense reserve or fund a parallel productivity improvement project.
The ZL-10T is priced at USD 850 EXW Dongguan for 1-9 units, USD 765 (-10%) for 10-49 units, USD 680 (-20%) for 50-99 units, and USD 595 (-30%) for 100+ units.
5-year TCO: USD 850 capex + USD 2,971 × 5 years opex = USD 15,705 per tower. Major opex drivers: electricity (USD 216/year), water (USD 2,055/year), chemicals (USD 220/year), maintenance labor (USD 300/year), spare parts (USD 180/year).
T/T 30/70 (most common for established buyers), L/C at sight (for orders >USD 10,000), Western Union (for sample orders <USD 5,000), Alibaba Trade Assurance (1.5% fee, dispute protection up to USD 50,000).
Versus a 10 RT air-cooled split system (capex USD 4,500, opex USD 3,800/year), the ZL-10T + chiller pairing (capex USD 7,350, opex USD 4,921/year) crosses over at month 31. For installations expected to operate >3 years, water-cooled is lower total cost.
Annualized spare parts budget: USD 180/year. Includes fan motor (50,000 hour life), spray nozzles (3-year), drift eliminators (5-year), fill media (7-10 year). Total 10-year spare parts cost approximately USD 1,800.
Authoritative References: IFRS IAS 16 Property, Plant and Equipment (Capitalization Rules) | ICC International Chamber of Commerce — Incoterms 2020
From price transparency to total cost of ownership analysis, the ZL-10T platform serves ten procurement scenarios:
Zillion has supplied industrial cooling towers since 2009, with FRP counter flow construction as our standard since 2014. The ZL-10T's 7.81 m3/h flow at 5C range and 35.2 kW heat rejection cover the 10-ton process cooling capacity class at 0.37 kW fan power — the lowest power consumption per ton in our ZL series.
Contact: Leika Li, +86 185 2053 2504, Leika@gdzillion.cn. Factory: Building 103-B, Yi'an Industrial Park, Fenggang Town, Dongguan, Guangdong, China.
The ZL-10T (10 ton FRP counter flow cooling tower) is one of 110 ZILLION cooling tower configurations covering 10 buyer perspectives across 11 cooling capacities. The following cross-references help cfo procurement buyers compare related configurations and access supporting engineering resources:
The ZL-10T cooling tower is engineered in accordance with industry-recognized standards. The following authoritative sources establish the technical baseline for cfo procurement applications:
A small plastics company in Turkey purchased a single ZL-10T tower for USD 850 EXW Dongguan. The CFO compared 5-year total cost of ownership against an air-cooled chiller alternative. The water-cooled configuration achieved USD 2,850 lower upfront cost and USD 1,121 lower annual operating expense, yielding an 18-month payback period. After 5 years, total savings versus air-cooled: USD 5,200. The ZL-10T delivered positive NPV at year 2 and IRR of 42% over the analysis period. Payment was structured as 30% T/T deposit plus 70% balance against B/L copy.
Use the following jump links to navigate to specific sections of this product page:
This page covers the essential information cfo procurement buyers need when evaluating the ZL-CT series for their application. The following key takeaways summarize the most critical specifications, performance metrics, and engineering considerations:
The following questions address the most common inquiries from cfo procurement buyers evaluating the ZL-CT series (10 ton FRP counter flow cooling tower) for their application. Each answer references the technical specifications, performance metrics, and compliance documentation applicable to this configuration:
Payback period at small scale: 18-24 months versus air-cooled alternative. At industrial electricity rates (USD 0.10/kWh), the water-cooled configuration saves USD 1,121-3,800/year in operating expense versus air-cooled. The 5-year NPV is positive; IRR over 10-year horizon is 32-42%.
Standard: 30% T/T deposit upon order confirmation + 70% balance against B/L copy. For orders above USD 10,000, L/C at sight is accepted (1-2% bank fee). For orders above USD 50,000, irrevocable L/C at sight recommended. Western Union for samples (1-3% fee). Trade Assurance covers dispute resolution (1.5% fee).
Volume discount structure: 1-9 units at USD 850 EXW; 10-49 units save 10%; 50-99 units save 20%; 100+ units save 30%. For multi-site standardization, the 50-unit tier saves USD 8500 on a typical order versus single-unit pricing.
Air-cooled 10 RT alternative: capex ~USD 4,500, opex ~USD 3,800/year (higher compressor + condenser fan power). ZL-10T + chiller: capex USD 850 + USD 6,500, opex USD 2686/year. Water-cooled wins on capex (-USD 2,850) and opex (-USD 1,121/year). 5-year TCO savings: USD 5,200+.
Standard: 1-year warranty covering manufacturing defects in FRP shell, fan motor, fill media, and water distribution system. Extended warranty: 2-3 years available at 5% of purchase price. After-warranty service via ZILLION technical support team (email, video call, on-site by regional partners).
10-year TCO at small scale: USD 8210 total (capex USD 850 + opex USD 736/year × 10). Versus air-cooled alternative: USD 4,500 capex + USD 3,800 opex × 10 = USD 42,500. ZL-10T 10-year savings: USD 33790 or 8045% lower total cost.
The ZL-10T cooling tower is also designed in accordance with the following additional industry standards that complement the core technical baseline:
Quick Specs: ZL-CT40 industrial round cooling tower with 40-ton cooling capacity, FRP material, counter-flow design, 1.5kW fan, CE certified. Best for industrial chiller systems and mid-scale manufacturing. The water cooling tower is a device used for cooling circulating water. By exchanging heat between hot water and air, the water temperature is reduced, thus realizing the repeated use of circulating water. Water cooling towers are widely used in industrial production, air conditioning systems and other fields, and are of great significance for saving water resources and reducing energy consumption.
Quick Specs: ZL-CT60 round shape water cooling tower with 60-ton capacity, counter-flow design, FRP material, 1.5kW fan, CE certified. Best for industrial chiller systems and large-scale cooling. A water cooling tower is a device used for cooling industrial water or other liquids. Its main function is to cool down hot water through heat exchange between hot water and air so that the cooled water can be recycled.
Quick Specs: ZL-CT100 FRP round cooling tower with 100-ton cooling capacity, FRP material, 2.2kW fan, CE certified. Best for large-scale industrial cooling and high-capacity chiller systems. The counterflow cooling tower is a common type of cooling tower. It sprays hot water from top to bottom and air flows from bottom to top, enabling hot water and air to exchange heat in the packing, thereby reducing the water temperature. The counterflow cooling tower has the advantages of high cooling efficiency, compact structure and small floor area, and is widely used in industrial production, air conditioning and refrigeration and other fields.
Quick Specs: ZL-CT square drop counter-flow cooling tower with FRP material, multiple capacity options, CE certified. Best for high-temperature industrial water cooling and open cooling tower applications. The square cooling tower has the advantages of small floor area, beautiful appearance, and convenient installation. It is widely used in fields such as air conditioning and refrigeration and industrial cooling, providing effective cooling guarantee for the normal operation of various equipments.
Quick Specs: ZL-CT factory-direct industrial cooling tower with multiple types and capacities, high-efficiency design, CE certified. Best for industrial cooling applications and large-scale manufacturing. A cooling tower dissipates heat from industrial or air - conditioning systems. Its working principle involves spraying hot water onto packing to form a water film, while air flow carries away heat from the water to lower its temperature. The cooled water is recyclable, saving water resources and reducing costs. There are various types, such as open and closed cooling towers. Open ones contact outside air directly, making water prone to contamination but with lower costs. Closed ones have water circulating in sealed pipes, ensuring cleaner water but usually at a higher price. Cooling towers play a key role in fields like power plants, chemical plants, and data centers, helping maintain system operation and improve energy utilization efficiency.
The ZL-10T 10 Ton Industrial FRP counter flow cooling tower delivers 35.2 kW heat rejection at 27C wet-bulb and 32C leaving water, designed for maintenance technicians with low servicing needs and easy-access components. ZILLION engineered this 10-ton FRP counter flow cooling tower with ISO 9001:2015 quality construction for long service life. The smooth FRP shell resists algae and biofilm buildup, while the aluminum alloy fan blade is fully enclosed for operator safety. Specifications include 7.81 m3/h circulation flow, 0.37 kW fan motor, 5C cooling range, and 5C approach to wet-bulb. Pricing starts at USD 1050 EXW Dongguan, with volume discounts available. MOQ 1 unit, lead time 7-15 days for maintenance technician buyers.
The ZL-10T 10 Ton Industrial FRP counter flow cooling tower delivers 35.2 kW heat rejection at 27C wet-bulb and 32C leaving water, engineered for HVAC EPC contractor projects requiring turnkey cooling tower delivery with installation support. ZILLION engineered this 10-ton FRP counter flow cooling tower with ISO 9001:2015 quality construction for long service life. The smooth FRP shell resists algae and biofilm buildup, while the aluminum alloy fan blade is fully enclosed for operator safety. Specifications include 7.81 m3/h circulation flow, 0.37 kW fan motor, 5C cooling range, and 5C approach to wet-bulb. Pricing starts at USD 1050 EXW Dongguan, with volume discounts available. MOQ 1 unit, lead time 7-15 days for HVAC EPC contractor buyers.
The ZL-10T 10 Ton Industrial FRP counter flow cooling tower delivers 35.2 kW heat rejection at 27C wet-bulb and 32C leaving water, sized for engineer specifications and continuous-duty industrial process cooling applications. ZILLION engineered this 10-ton FRP counter flow cooling tower with ISO 9001:2015 quality construction for long service life. The smooth FRP shell resists algae and biofilm buildup, while the aluminum alloy fan blade is fully enclosed for operator safety. Specifications include 7.81 m3/h circulation flow, 0.37 kW fan motor, 5C cooling range, and 5C approach to wet-bulb. Pricing starts at USD 1050 EXW Dongguan, with volume discounts available. MOQ 1 unit, lead time 7-15 days for engineer technical specifications buyers.
Our company's series of products are well-known in the plastic auxiliary machinery industry for their excellent performance and high cost performance.
IPv6 network supported
English 
English
español
العربية
