| Parameter | Value |
|---|---|
| Model | ZL-10T |
| Cooling Capacity | 10 RT (35.2 kW heat rejection) |
| Water Flow Rate | 7.81 m3/h (130 L/min) |
| Cooling Range | 5C (37C inlet to 32C outlet at design WB 27C) |
| Approach to Wet-Bulb | 5C at design conditions |
| Fan Motor | 0.37 kW (0.5 HP) 380V 3-phase 50Hz |
| Fan Diameter | 635 mm axial |
| Air Flow Rate | 85 CMM (50,920 m3/h) |
| Head Loss at Design Flow | 13 kPa |
| Tower Dimensions (H x D) | 1820 x 940 mm |
| Dry Weight | 46 kg |
| Operating Weight (filled) | 190 kg |
| Noise Level | 60 dB(A) at 1 m |
| Tower Body Material | FRP (Fiberglass Reinforced Plastic) |
| Fan Blade Material | ABS plastic |
| Configuration | Counter Flow Square |
| Voltage | 380V 3-phase 50Hz (customizable 220V/415V) |
| Certifications | CE / ISO 9001:2015 |
| Warranty | 1 year (consumables excluded) |
The ZL-10T's 35.2 kW cooling capacity provides summer climate control for greenhouses in the 100-500 m² range:
Cooling load calculation: Greenhouse summer cooling load = 0.3-0.5 kW/m² (mid-latitude summer, single-glazed glass or polycarbonate, shade cloth deployed).
Coverage by greenhouse size:
100 m² greenhouse: 30-50 kW cooling load. ZL-10T (35.2 kW) at 70-100% utilization. Match for crop cooling in moderate climates.
200 m² greenhouse: 60-100 kW cooling load. ZL-10T undersized. Use ZL-30T (110 kW) or ZL-40T (140 kW).
300 m² greenhouse: 90-150 kW cooling load. ZL-50T (160 kW) recommended.
500 m² greenhouse: 150-250 kW cooling load. ZL-80T (270 kW) or larger.
For a typical 100-150 m² greenhouse growing tomatoes, cucumbers, or peppers, the ZL-10T paired with a pad-and-fan ventilation system delivers optimal summer climate control. The ZL-10T cools the recirculated water for the pad system, providing 8-12°C temperature reduction across the pad for incoming outside air.
In craft brewery and small-scale commercial brewery applications, the ZL-10T provides primary cooling for wort cooling (post-boil to fermentation temperature) and fermenter temperature control:
Wort cooling load: Boiled wort exits the brew kettle at 98-100°C and must be cooled to 18-22°C for yeast pitching. Typical 300 L batch: 300 L × 4.186 kJ/kg°C × 78°C ΔT = 98 MJ = 27.2 kWh per batch. At 2-hour cooling target: 13.6 kW average cooling load.
ZL-10T matching: ZL-10T provides 35.2 kW cooling capacity, comfortably above the 13.6 kW average for 300 L batches. Cooling time: 2-2.5 hours per batch.
Plate heat exchanger pairing: Direct contact between cooling tower water and wort is not permitted (sanitation). Use a plate heat exchanger: wort on one side, cooling tower water on the other. Heat transfer rate: 15-25 kW per heat exchanger in this flow range.
Fermenter temperature control: After wort cooling, fermenters generate 0.5-1 kW of metabolic heat during the 5-7 day fermentation. The ZL-10T's residual capacity (after wort cooling) maintains fermenter temperature via a secondary cooling loop with a smaller plate heat exchanger.
For dairy processing operations, the ZL-10T provides cooling water for HTST (High-Temperature Short-Time) pasteurization systems and batch pasteurizers:
HTST pasteurization: Milk heated to 72°C for 15 seconds, then rapidly cooled to 4°C. Cooling load for a 1,000 L/hour HTST line: 1,000 L/h × 4.186 kJ/kg°C × 68°C ΔT = 285 MJ/h = 79 kW cooling load.
ZL-10T capacity: 35.2 kW cooling capacity is undersized for HTST (requires ZL-60T or larger). Suitable for batch pasteurizers (200-500 L batches).
Batch pasteurization: 300 L milk heated to 63°C for 30 minutes, then cooled to 4°C. Cooling load: 300 L × 4.186 × 59 = 74 MJ = 20.6 kWh per batch. At 1-hour cooling target: 20.6 kW cooling load.
Plate heat exchanger + ZL-10T: Plate heat exchanger transfers heat from milk to cooling tower water. ZL-10T cools the water, which recirculates back to the heat exchanger. Cooling time: 60-90 minutes per 300 L batch.
For dairy operations, specify the SS316L sanitary option with sanitary tri-clamp connections for clean-in-place compatibility.
For slaughterhouse operations, the ZL-10T serves multiple cooling applications:
Carcass cooling: Post-slaughter, beef and pork carcasses are cooled from 38°C (body temperature) to 4°C (refrigeration temperature) over 24 hours. The cooling load depends on carcass mass and ambient conditions. For a small-to-medium slaughterhouse processing 50-100 animals per day, total carcass cooling load: 50-100 kW.
Process water cooling: Slaughter operations use warm water for cleaning (40-45°C) and chilled water for carcass spray cooling (1-2°C). The chilled water loop requires cooling tower + chiller pairing. ZL-10T provides the primary cooling; chiller handles the low-temperature target.
ZL-10T for slaughterhouse: The ZL-10T is suitable for small operations (10-30 animals/day) where process water cooling is the primary application. For larger operations, step up to ZL-30T or larger.
Sanitary design requirements: Specify SS316L construction, sanitary tri-clamp fittings, and sloped basin drainage for CIP compatibility. Daily CIP cycles are essential to prevent bacterial growth in the cooling water circuit.
For mushroom cultivation facilities (shiitake, oyster, button mushrooms), the ZL-10T serves substrate cooling during phase II composting and climate control during fruiting:
Substrate cooling (post-pasteurization): After phase II composting at 55-60°C, substrate must cool to 25°C for spawning. Cooling load for 1 tonne of substrate: 1,000 kg × 4.186 kJ/kg°C × 30°C ΔT = 126 MJ = 35 kWh per tonne. For a small mushroom farm processing 1-2 tonnes/day, ZL-10T capacity (35.2 kW) provides 1-2 hour cooling cycles.
Fruiting room climate control: Mushroom fruiting requires 14-18°C air temperature, 85-95% humidity, and CO2 <1,000 ppm. The ZL-10T's 32°C leaving water is suitable for cooling humidification water (typically chilled to 15°C with a chiller).
ZL-10T sizing for mushroom farm: For a 100-200 m² mushroom cultivation facility, ZL-10T supports substrate cooling and provides primary cooling for fruiting room climate control.
Sanitation requirements: Specify SS316L + sanitary piping for food-contact applications. Daily sanitization between substrate batches is essential to prevent Trichoderma and other contaminant molds.
For aquaculture (fish farming) and hydroponic crop production, water temperature stability is critical for animal/plant health and growth rates. The ZL-10T provides primary cooling for recirculating aquaculture systems (RAS) and hydroponic nutrient solutions:
Aquaculture (warm-water species): Tilapia, catfish, and shrimp thrive at 26-30°C. In summer, recirculating system water can exceed 32°C, reducing growth rates and increasing disease risk. ZL-10T's 32°C cooling water (recirculated through plate heat exchanger) maintains aquaculture tank temperature at 28°C ± 1°C.
Hydroponic nutrient solution: Lettuce, herbs, and strawberries grow best with nutrient solution at 18-22°C. In summer greenhouse hydroponic systems, nutrient solution can reach 28-32°C, reducing dissolved oxygen and causing root rot. ZL-10T cools the nutrient solution to 22°C ± 2°C through a plate heat exchanger.
Aquaponics integration: Combined fish-and-plant systems benefit from ZL-10T's stable cooling: fish tank water cools through heat exchanger, then flows to plant grow beds as both irrigation and nutrient source.
Sizing rule of thumb: For aquaculture/hydroponic applications, ZL-10T supports 1,000-2,000 L of recirculating water with 1°C temperature differential. Larger systems require ZL-30T or ZL-50T.
Sanitation: UV sterilization or ozone treatment of recirculating water prevents pathogen buildup in aquaculture systems. ZL-10T's stainless steel upgrade option supports chlorination-based cleaning protocols.
ZL-10T (35.2 kW cooling capacity) supports 100 m² greenhouse at 70-100% utilization. For larger greenhouses (200 m², 300 m², 500 m²), step up to ZL-30T, ZL-50T, or ZL-80T respectively.
Yes. For 300 L batches (cooling from 98°C to 22°C), the ZL-10T's 35.2 kW capacity provides 2-2.5 hour cooling. Pair with a plate heat exchanger for sanitary wort-to-cooling-water separation.
For batch pasteurizers (200-500 L batches), the ZL-10T is adequate. For HTST systems (1,000+ L/hour), the ZL-10T is undersized — use ZL-60T or larger. Specify SS316L + sanitary tri-clamp connections for dairy.
For small slaughterhouses (10-30 animals/day), the ZL-10T serves process water cooling. For larger operations (50-100 animals/day), step up to ZL-30T or larger. Specify SS316L + CIP-compatible sanitary piping.
For mushroom cultivation, ZL-10T supports 1-2 tonnes/day substrate cooling and primary fruiting room cooling. For aquaculture (tilapia, catfish, shrimp), ZL-10T maintains 1,000-2,000 L recirculating water at ±1°C temperature stability.
Authoritative References: USDA Food Safety and Inspection Service Guidelines | FDA Food Safety Modernization Act (FSMA)
Explore other ZL-10T 10 Ton FRP Counter Flow Cooling Tower variants engineered for different applications:
Zillion has supplied industrial cooling towers since 2009, with FRP counter flow construction as our standard since 2014. The ZL-10T's 7.81 m3/h flow at 5C range and 35.2 kW heat rejection cover the 10-ton process cooling capacity class at 0.37 kW fan power — the lowest power consumption per ton in our ZL series.
Contact: Leika Li, +86 185 2053 2504, Leika@gdzillion.cn. Factory: Building 103-B, Yi'an Industrial Park, Fenggang Town, Dongguan, Guangdong, China.
Quick Specs: ZL-CT40 industrial round cooling tower with 40-ton cooling capacity, FRP material, counter-flow design, 1.5kW fan, CE certified. Best for industrial chiller systems and mid-scale manufacturing. The water cooling tower is a device used for cooling circulating water. By exchanging heat between hot water and air, the water temperature is reduced, thus realizing the repeated use of circulating water. Water cooling towers are widely used in industrial production, air conditioning systems and other fields, and are of great significance for saving water resources and reducing energy consumption.
Quick Specs: ZL-CT60 round shape water cooling tower with 60-ton capacity, counter-flow design, FRP material, 1.5kW fan, CE certified. Best for industrial chiller systems and large-scale cooling. A water cooling tower is a device used for cooling industrial water or other liquids. Its main function is to cool down hot water through heat exchange between hot water and air so that the cooled water can be recycled.
Quick Specs: ZL-CT100 FRP round cooling tower with 100-ton cooling capacity, FRP material, 2.2kW fan, CE certified. Best for large-scale industrial cooling and high-capacity chiller systems. The counterflow cooling tower is a common type of cooling tower. It sprays hot water from top to bottom and air flows from bottom to top, enabling hot water and air to exchange heat in the packing, thereby reducing the water temperature. The counterflow cooling tower has the advantages of high cooling efficiency, compact structure and small floor area, and is widely used in industrial production, air conditioning and refrigeration and other fields.
Quick Specs: ZL-CT square drop counter-flow cooling tower with FRP material, multiple capacity options, CE certified. Best for high-temperature industrial water cooling and open cooling tower applications. The square cooling tower has the advantages of small floor area, beautiful appearance, and convenient installation. It is widely used in fields such as air conditioning and refrigeration and industrial cooling, providing effective cooling guarantee for the normal operation of various equipments.
Quick Specs: ZL-CT factory-direct industrial cooling tower with multiple types and capacities, high-efficiency design, CE certified. Best for industrial cooling applications and large-scale manufacturing. A cooling tower dissipates heat from industrial or air - conditioning systems. Its working principle involves spraying hot water onto packing to form a water film, while air flow carries away heat from the water to lower its temperature. The cooled water is recyclable, saving water resources and reducing costs. There are various types, such as open and closed cooling towers. Open ones contact outside air directly, making water prone to contamination but with lower costs. Closed ones have water circulating in sealed pipes, ensuring cleaner water but usually at a higher price. Cooling towers play a key role in fields like power plants, chemical plants, and data centers, helping maintain system operation and improve energy utilization efficiency.
The ZL-10T 10 Ton FRP Counter Flow Cooling Tower from Zillion delivers reliable cfo procurement performance. Key specifications include: ZL-10T 10 ton FRP counter flow cooling tower at USD 850 EXW 5-year TCO: USD 850 capex + USD 2,971/year opex Volume discounts: USD 765 (10+), USD 680 (50+), USD 595 (100+) Payment terms: T/T 30/70, L/C, Western Union, Alibaba Trade Assurance 18-month payback vs USD 4,500 air-cooled alternative Annual spare parts budget: USD 180 EXW Dongguan, lead time 7-15 days CE certified for global deployment Designed for industrial-grade cfo procurement applications, the ZL-10T combines proven FRP counter flow technology with precision-engineered components for 15-20 year service life. CE / ISO 9001:2015 certified. Contact Leika at Leika@gdzillion.cn for quotation.
The ZL-10T 10 Ton FRP Counter Flow Cooling Tower from Zillion delivers reliable maintenance tech performance. Key specifications include: ZL-10T water chemistry: pH 6.5-9.0, Ca hardness <500 ppm Conductivity <2,500 uS/cm, TSS <50 ppm Quarterly fill media visual inspection (15 minutes) Annual wash with descaling solution (3-4 hours) Fan motor 50,000 hour bearing life (8.5 years at 16 hr/day) Winter freeze protection: basin heater USD 220/year operating Annual water treatment chemical cost: USD 490 Drift eliminator replacement: 5-year cycle Designed for industrial-grade maintenance tech applications, the ZL-10T combines proven FRP counter flow technology with precision-engineered components for 15-20 year service life. CE / ISO 9001:2015 certified. Contact Leika at Leika@gdzillion.cn for quotation.
The ZL-10T 10 Ton FRP Counter Flow Cooling Tower from Zillion delivers reliable epc contractor performance. Key specifications include: ZL-10T concrete pad: 600x600x150 mm C25/30 mix Wind load rating: 0.5 kPa for open terrain Piping connections: DN50 inlet/outlet, DN15 makeup, DN50 overflow 46 kg dry weight enables two-person ground-level installation Rooftop lift: portable gantry rated 250 kg Electrical: 380V 3-phase 50Hz, 1.2-1.5 A FLA VFD option for 30-60 Hz variable-speed operation 12-point pre-commissioning checklist Designed for industrial-grade epc contractor applications, the ZL-10T combines proven FRP counter flow technology with precision-engineered components for 15-20 year service life. CE / ISO 9001:2015 certified. Contact Leika at Leika@gdzillion.cn for quotation.
Our company's series of products are well-known in the plastic auxiliary machinery industry for their excellent performance and high cost performance.
IPv6 network supported
English 
English
español
العربية
